Powerstax plc

FP Series 1,000W & 600W PFC Full Brick Size Module from Powerstax plc 

FP Series PFC Module

The FP Series of Power Modules are a range of high performance Power Factor Correction AC-DC Converters. The converters have been developed to provide front-end power conditioning for High Input Voltage DC-DC Modules. Wherever used the Powerstax Power Modules are a cost effective alternative to designing power supplies with discrete components.

The FP Series of Power Modules incorporate surface mount technology to achieve high power density and reliability. The converters are available with universal input voltage range for worldwide application or high-line (230Vrms) only, with an output voltage of 380V.

The ENABLE output can be used to control the load DC-DC converters. DCOK and VAUX outputs are available to provide monitoring to the system if required.

The modules have inrush current limiting, thermal shut down, output over-voltage
and input under-voltage protection. In addition, a SYNC input pin allows the synchronising of units to an external system clock for particularly noise sensitive applications.
 
Features:

• High Efficiency of >95%
• Conforming to IEC-1000-3-2
• Standard “full brick” package (116.8 x 61 x 12.7mm)
• 1,000W and 600W versions
• Voltage input range 85Vrms - 264Vrms
• Typical Power Factor of 0.99
• External synchronisation Facility
• Enable Signal for downstream converters
• Operating Temperature -25°C to +100°C (base plate)
• Thermal protection & Inrush Current Limiting
• Overvoltage Protection
• DC OK signal provides early warning of mains failure
• Two Year Warranty