| |
|
About
Powerstax plc
|
|
| |
|
|
| |
|
|
Personnel
and Premises.
Powerstax plc is a rapidly expanding organisation with more
than ½ of our employees being electronic or mechanical engineers,
clearly demonstrating our commitment to research, development
and design excellence.
ISO9001 approved, the Company is located on a high-tech business
park at Unit B5, Armstrong Mall, Southwood Business Park, Farnborough,
Hampshire, GU14 0NR, close to the airfield famous for its international
airshow. The premises are adjacent to a major motorway, 30 minutes
drive from Heathrow International Airport, and 45 mins from
Central London. Samples, prototypes and low volumes are produced
in the UK. |
|
Powerstax
Main office in Farnborough, England |
| |
|
|
| In
early 2006 an additional Research and Development satellite
office became operational. Dedicated exclusively to engineering
and development of Powerstaxs' own AC, DC and Custom power
solutions, the new 950SqFt (88m2) unit is 33 miles from the
main Powerstax office and located in an area noted for its
concentration of electronics engineering excellence.
The
new Powerstax Barnham facility is 1 mile (1.6Km) south of
the main A27 south coast trunk road between Worthing and Chichester.
It is 1/2 mile (0.8Km) from the nearby Barnham railway station.
To contact please use main Powerstax Swtchboard +44 (0) 1252
407800
|
|
Entrance to Powerstax R&D facility is Barnham, England |
|
|
| |
|
| NB:
Powerstax is seeking Design and other Electronic Engineers at all
levels for positions in the new Barnham facility. |
|
| |
| |
|
| pdf
format (316K) |
|
| |
|
| Sales
Partners
Powerstax is committed to offering the very best Products
and Service to all our customers. To achieve a consistent
high quality of customer focus at a local level, Powerstax
has appointed a series of carefully selected Sales Partners.
Each operates with the full help and support of Powerstax
to ensure complete customer satisfaction from initial product
selection to after sales service. |
|
|
|
(103KB) |
|
| |
|
| |
|
 |
|
Volume
Production Facilities
Powerstax has a strong relationship with a Hong Kong manufacturer
who has a production facility located in DongGuan, China. The
plant is a modern, purpose built facility with Quality Assurance
Approval to ISO 9002 standard and approved by most well known
product safety approval entities. The company has a team of
professional executives and substantial workforce having extensive
management, manufacturing and design experience from their many
years of involvement in the electronics & power supply industries.
|
|
|
| |
|
| Quality
Powerstax plc enthusiastically embraces a fully co-ordinated
quality system, designed to enhance primary functions in all
areas and achieve a consistently high level of performance
through department integration. The system is structured to
review, check and continuously improve. The quality management
system is in accordance with quality standard ISO 9001. Lloyds
Register Certification (LRQA) to ISO 9001 was achieved in
July 2002 with certification to the new BS EN ISO9001-2000
standard in November 2003. for a copy of the LRQA ISO9001certificate |
|
|
WEEE
& RoHS Directives
Powerstax plc Powerstax plc has always been concerned with environmental
issues by developing increasingly efficient AC-DC and DC-DC
conversion power products. The
European Union’s (EU) RoHS Directive 2002/95/EC “Restriction
of Hazardous Substances” restricts the use of specific
hazardous substances in electrical and electronic equipment
placed on the market from July 1st 2006. Powerstax
plc is committed to complying with the RoHS Directive, as
of June 1st 2006. |
|
 |
For
a full and comprehensive statement regarding RoHS compliance
at Powerstax please download the Powerstax plc RoHS product
compliance document below.
Powerstax plc already complies with the WEEE directive (Reg.
No. AAA027) being registered and having a licensed disposal
process in place. For
any enquiries regarding Powerstax WEEE& RoHS directives
please contact Powerstax.
|
click
logo to download Powerstax plc RoHS product compliance document
|
|
|
| |
|
 |
|
Engineering
Design
Powerstax has a modern engineering design department with highly
qualified electronic and mechanical engineers, using advanced
3D CAD and computer based circuit design and development systems.
A fully equipped product development department enables pre-production
engineering and prototyping to minimise the time to full production.
|
|
|
| |
|
Prior
to May 2005, Powerstax was known as Advanced Power Conversion
PLC.
Pleasefor further details relating
to the change of name. |
|
| |
|
If
you have any query, or require further information on Powerstax
products, services or corporate details please contact Powerstax
Marketing - click link below |
|
|
|
Contact
Marketing at Powerstax |
|
| |
|
Designed
& maintained by Mark Carter
For technical questions and comments related to this web site or its
implementation, send e-mail to
|
|
|
|
| |
|
